Arrow Fat Left Icon Arrow Fat Right Icon Arrow Right Icon Cart Icon Close Circle Icon Expand Arrows Icon Hamburger Icon Information Icon Down Arrow Icon Mail Icon Mini Cart Icon Person Icon Ruler Icon Search Icon Shirt Icon Triangle Icon Bag Icon Play Video

Gasket sealer instructions

Gasket sealer instructions

DIRECTIONS:

Surfaces should be clean and dry. Apply an even, continuous 1/8" bead of silicone to one surface, surrounding all bolt holes. Remove excess at once with knife. Assemble parts immediately. Do not squeeze out silicone by over tightening bolts. Silicone fully cures in 24 hours. Replace cap after use. Clean hands with dry cloth. Clean tools with non-flammable cleaning fluid.

Note: Not recommended for use on head gaskets or parts in contact with gasoline.

Comments on this post (0)

Leave a comment

.badge-soldout { display: none !important; }